Industrial roller shutters in Wellington

In short

We can fit new steel roller shutters and replace old, damaged ones in Wellington and across Shropshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Wellington
Postcode district: TF1
Area: Shropshire
Survey: Free for new installations

What to specify

Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

What this work can involve

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Who is responsible for door safety at a site in Wellington?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you convert our manual shutter in Wellington to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Can you supply security-rated shutters in Wellington?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Does an electric roller shutter at our Wellington site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Wellington

Our teams cover Wellington (TF1) and nearby Telford, Shrewsbury, Bridgnorth, along with the rest of Shropshire.

Other services in Wellington

More about Industrial roller shutters · industrial doors in Wellington. Last updated 19 October 2026.