Industrial roller shutters in Shrewsbury

At a glance

We can fit new steel roller shutters and replace old, damaged ones in Shrewsbury and across Shropshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Shrewsbury
Postcode district: SY1
Area: Shropshire
Survey: Free for new installations

What to specify

Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.

Typical scopes of work

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Shrewsbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How much is an industrial roller shutter in Shrewsbury?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Shrewsbury, we confirm a fixed price for your opening in writing.

Can you convert our manual shutter in Shrewsbury to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in Shrewsbury?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Shrewsbury

Our teams cover Shrewsbury (SY1) and nearby Wellington, Telford, Oswestry, along with the rest of Shropshire.

Other services in Shrewsbury

More about Industrial roller shutters · industrial doors in Shrewsbury. Last updated 19 October 2026.