Insulated roller shutter doors in Lichfield

The short version

Replacing a draughty roller shutter in Lichfield? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Lichfield
Postcode district: WS13
Area: Staffordshire
Survey: Free for new installations

Options that matter on site

Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.

Typical scopes of work

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Lichfield?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Lichfield: your questions

Is there enough headroom for an insulated roller door at our Lichfield unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

How long does insulated roller door installation take in Lichfield?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Does a powered insulated roller door in Lichfield need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Lichfield

Besides Lichfield, we can survey and quote for sites in Burntwood, Tamworth, Aldridge and the rest of Staffordshire.

Other services in Lichfield

More about Insulated roller shutter doors · industrial doors in Lichfield. Last updated 19 October 2026.