Quick answer
From traffic lights and interlocks to vehicle restraints and loading houses, we fit the safety systems a busy loading bay in the East Riding of Yorkshire needs, alongside the door, leveller and shelter they control.
- Area
- East Riding of Yorkshire
- Nation
- England
- Main town
- Hull
- Survey
- Free for new installations
What we fit in the East Riding of Yorkshire
- One package. Every item at the bay is chosen to work with the others, not bought in isolation.
- Phased refurbishment. We work through the bays in turn, leaving the rest in use.
- Dock levellers. Hydraulic levellers chosen for your vehicle bed heights and handling equipment.
- Traffic lights. Clear signals for drivers and forklift operators at every stage of loading.
- Shelters and seals. A shelter or seal closes the gap around the vehicle during loading.
Jobs we can carry out
- Adding a loading house to a unit where the warehouse floor cannot be cut for a leveller pit.
- Designing and fitting a run of complete loading bays on a new-build distribution centre to the main contractor's programme.
- Refurbishing bays one at a time with new sectional doors, levellers and inflatable shelters so loading continues.
What the law expects at a loading bay
Across Great Britain, including the East Riding of Yorkshire, loading bays bring together several duties: maintained work equipment under PUWER 1998, safe traffic routes under the Workplace Regulations 1992, and safe powered doors under the Supply of Machinery (Safety) Regulations 2008. Dock levellers should meet BS EN 1398, and the site's risk assessment should cover vehicle creep and drive-aways.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Complete loading bay | on survey (typically £14,995 – £39,995 per bay) |
| Dock leveller, hydraulic swing-lip, into prepared pit | £6,495 – £10,995 |
| Dock shelter (retractable) | £2,195 – £5,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about complete loading bays
Do you maintain loading bay equipment across Yorkshire and the Humber?
Yes. We service and repair doors, levellers, shelters and controls across Yorkshire and the Humber, and can set up planned maintenance covering every item at the bay. Service and repair visits are chargeable.
Can a loading bay be added to our the East Riding of Yorkshire unit without a pit?
Often, yes. A loading house built out in front of the door, or an edge-of-dock leveller for light use, avoids cutting a pit in the floor. We check which option suits the building and the traffic on survey.
Can you refurbish our loading bays in the East Riding of Yorkshire without closing the site?
Yes. Bays can be refurbished one at a time so the others stay in use, and work can be done out of hours where needed. Each bay is commissioned before we move on to the next.
Towns in the East Riding of Yorkshire we cover
We cover 4 towns in the East Riding of Yorkshire for complete loading bays, including Hull, Bridlington, Beverley, Goole.
Other services in the East Riding of Yorkshire
- Industrial door replacement
- Sectional overhead doors
- Bollards and door protection
- Impact traffic doors
- Planned maintenance contracts
- High-speed doors
- Hangar and large-span doors
- PVC strip curtains
More about Complete loading bays. Last updated 19 October 2026.
