Door safety upgrades in Haverfordwest

In short

Is a powered door at your Haverfordwest site missing safety devices, or are they damaged or bypassed? We bring older doors up to date with monitored safety edges, photocells, light curtains and fall protection.

Town: Haverfordwest
Postcode district: SA61
Area: Dyfed
Survey: Free for new installations

Options that matter on site

Force testing. We measure how hard the door closes and record the results at each test point.
Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Photocells. If something breaks the beam, the door will not close.
Safety edges. Edges on the closing rail detect contact and send the door back up.
Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.

Typical scopes of work

Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.

Powered door rules that apply in Haverfordwest

Haverfordwest is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for door safety upgrades in Haverfordwest

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Haverfordwest

How much does a door safety upgrade cost in Haverfordwest?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Haverfordwest.

Do our powered doors in Haverfordwest need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

Can you force-test our doors in Haverfordwest?

Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.

Door safety upgrades near Haverfordwest

Haverfordwest is in the SA61 postcode district in Dyfed. We also cover Milford Haven, Carmarthen, Llanelli.

Other services in Haverfordwest

More about Door safety upgrades · industrial doors in Haverfordwest. Last updated 19 October 2026.