In short
Busy doors in Ealing (W5) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Ealing
- Postcode district
- W5
- Area
- Greater London
- Survey
- Free for new installations
Options for door safety upgrades in Ealing
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Photocells. Beams across the opening that stop the door closing while broken.
- Light curtains. Full-height multi-beam detection across the whole opening.
What this work can involve
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Powered door rules that apply in Ealing
Ealing is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Budgeting for door safety upgrades in Ealing
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Ealing: your questions
How long does a safety upgrade take in Ealing?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Can you force-test our doors in Ealing?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Our door at our Ealing site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Ealing
Working in Ealing? We also take on jobs in Acton, Greenford, Chiswick and across Greater London.
- Door safety upgrades in Acton
- Door safety upgrades in Greenford
- Door safety upgrades in Chiswick
- Door safety upgrades in Wembley
- Door safety upgrades in Southall
- Door safety upgrades in Isleworth
Other services in Ealing
- PVC strip curtains
- Complete loading bays
- Cold store and freezer doors
- Sectional overhead doors
- Dock shelters and seals
- Dock leveller and loading bay repairs
- Door automation and controls
- Bollards and door protection
More about Door safety upgrades · industrial doors in Ealing. Last updated 19 October 2026.