In short
Busy doors in Mitcham (CR4) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Mitcham
- Postcode district
- CR4
- Area
- Greater London
- Survey
- Free for new installations
Options that matter on site
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Records. Written results and updated risk assessment for your files.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
What this work can involve
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Safety law for industrial doors in England
Industrial doors in Mitcham are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for door safety upgrades in Mitcham
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Mitcham
Our door at our Mitcham site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How long does a safety upgrade take in Mitcham?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Can you force-test our doors in Mitcham?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Door safety upgrades near Mitcham
Working in Mitcham? We also take on jobs in Morden, Wimbledon, Streatham and across Greater London.
- Door safety upgrades in Morden
- Door safety upgrades in Wimbledon
- Door safety upgrades in Streatham
- Door safety upgrades in Carshalton
- Door safety upgrades in Wallington
- Door safety upgrades in Croydon
Other services in Mitcham
- Industrial door motor replacement
- High-speed doors
- Steel personnel and fire exit doors
- Door automation and controls
- Planned maintenance contracts
- Insulated roller shutter doors
- Sectional overhead doors
- Fire shutters
More about Door safety upgrades · industrial doors in Mitcham. Last updated 19 October 2026.