Quick answer
Is a powered door at your Gravesend site missing safety devices, or are they damaged or bypassed? We bring older doors up to date with monitored safety edges, photocells, light curtains and fall protection.
- Town
- Gravesend
- Postcode district
- DA12
- Area
- Kent
- Survey
- Free for new installations
Options for door safety upgrades in Gravesend
- Records. You receive a record of the devices fitted and the tests carried out.
- Photocells. If something breaks the beam, the door will not close.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Jobs we can carry out
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Who is responsible for door safety at a site in Gravesend?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Most installations in Gravesend can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Budgeting for door safety upgrades in Gravesend
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Gravesend: your questions
Will a safety upgrade at our Gravesend premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Our door at our Gravesend site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How long does a safety upgrade take in Gravesend?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Door safety upgrades near Gravesend
Gravesend is in the DA12 postcode district in Kent. We also cover Grays, Strood, South Ockendon.
- Door safety upgrades in Grays
- Door safety upgrades in Strood
- Door safety upgrades in South Ockendon
- Door safety upgrades in Stanford-le-Hope
- Door safety upgrades in Dartford
- Door safety upgrades in Rochester
Other services in Gravesend
- Door automation and controls
- Sliding and folding industrial doors
- Industrial roller shutters
- Impact traffic doors
- Industrial door motor replacement
- Hangar and large-span doors
- Complete loading bays
- Sectional overhead doors
More about Door safety upgrades · industrial doors in Gravesend. Last updated 19 October 2026.