In short
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Cardiff. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Cardiff
- Postcode district
- CF10
- Area
- South Glamorgan
- Survey
- Free for new installations
What to specify
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Records. Written results and updated risk assessment for your files.
What this work can involve
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Cardiff?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for door safety upgrades in Cardiff
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
Do you upgrade doors from other installers across South Glamorgan?
Yes. We upgrade safety devices on most makes of powered door across South Glamorgan, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Can you force-test our doors in Cardiff?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
How long does a safety upgrade take in Cardiff?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Door safety upgrades near Cardiff
Our teams cover Cardiff (CF10) and nearby Penarth, Caerphilly, Barry, along with the rest of South Glamorgan.
- Door safety upgrades in Penarth
- Door safety upgrades in Caerphilly
- Door safety upgrades in Barry
- Door safety upgrades in Risca
- Door safety upgrades in Newport (Gwent)
- Door safety upgrades in Pontypridd
Other services in Cardiff
- Planned maintenance contracts
- PVC strip curtains
- Industrial door motor replacement
- Bollards and door protection
- Impact traffic doors
- Sectional overhead doors
- Door automation and controls
- Industrial door installation
More about Door safety upgrades · industrial doors in Cardiff. Last updated 19 October 2026.
