Door safety upgrades in Felixstowe

Quick answer

We can carry out safety upgrades and force testing on industrial doors in Felixstowe and across Suffolk, recording every result for your maintenance file and updating each door's risk assessment to match.

Town: Felixstowe
Postcode district: IP11
Area: Suffolk
Survey: Free for new installations

Options for door safety upgrades in Felixstowe

Photocells. Beams across the opening that stop the door closing while broken.
Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.

Jobs we can carry out

Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.

Powered door rules that apply in Felixstowe

Felixstowe is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door safety upgrades

How much does a door safety upgrade cost in Felixstowe?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Felixstowe.

Can you force-test our doors in Felixstowe?

Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.

Do our powered doors in Felixstowe need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

Door safety upgrades near Felixstowe

Working in Felixstowe? We also take on jobs in Harwich, Ipswich, Clacton-on-Sea and across Suffolk.

Other services in Felixstowe

More about Door safety upgrades · industrial doors in Felixstowe. Last updated 19 October 2026.