In short
We can carry out safety upgrades and force testing on industrial doors in Swindon and across Wiltshire, recording every result for your maintenance file and updating each door's risk assessment to match.
- Town
- Swindon
- Postcode district
- SN1
- Area
- Wiltshire
- Survey
- Free for new installations
What to specify
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Photocells. If something breaks the beam, the door will not close.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
What this work can involve
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Powered door rules that apply in Swindon
Swindon is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Budgeting for door safety upgrades in Swindon
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Swindon
Do our powered doors in Swindon need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
How long does a safety upgrade take in Swindon?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
How much does a door safety upgrade cost in Swindon?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Swindon.
Door safety upgrades near Swindon
Besides Swindon, we can survey and quote for sites in Cirencester, Chippenham, Witney and the rest of Wiltshire.
- Door safety upgrades in Cirencester
- Door safety upgrades in Chippenham
- Door safety upgrades in Witney
- Door safety upgrades in Stroud
- Door safety upgrades in Newbury
- Door safety upgrades in Abingdon
Other services in Swindon
- Planned maintenance contracts
- Industrial door replacement
- Complete loading bays
- Dock levellers
- Impact traffic doors
- Industrial door motor replacement
- Sectional overhead doors
- Door automation and controls
More about Door safety upgrades · industrial doors in Swindon. Last updated 19 October 2026.
