Sectional overhead doors in Barnet

At a glance

Sectional doors suit premises in Barnet that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Barnet
Postcode district: EN5
Area: Greater London
Survey: Free for new installations

What to specify

Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.

Jobs we can carry out

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Safety law for industrial doors in England

Industrial doors in Barnet are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for sectional overhead doors in Barnet

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Barnet

Which safety devices does a powered sectional door in Barnet need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Can you replace a roller shutter with a sectional door at our Barnet unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Do you service sectional doors in Greater London?

Yes. We service and repair most makes of sectional door across Greater London, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Barnet

Working in Barnet? We also take on jobs in Potters Bar, Borehamwood, Finchley and across Greater London.

Other services in Barnet

More about Sectional overhead doors · industrial doors in Barnet. Last updated 19 October 2026.