Sectional overhead doors in Canary Wharf

The short version

Looking for sectional overhead door installers covering Canary Wharf? We quote a fixed price in writing after a free site survey, then fit and commission the door with the safety devices your site needs.

Town: Canary Wharf
Postcode district: E14
Area: Greater London
Survey: Free for new installations

Options that matter on site

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.

Examples of work we can quote for

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.

Powered door rules that apply in Canary Wharf

Canary Wharf is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Sites in and around Canary Wharf vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for sectional overhead doors in Canary Wharf

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which safety devices does a powered sectional door in Canary Wharf need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

How soon can a sectional door be fitted in Canary Wharf?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Can you replace a roller shutter with a sectional door at our Canary Wharf unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Canary Wharf

Besides Canary Wharf, we can survey and quote for sites in Bow, Canning Town, Greenwich and the rest of Greater London.

Other services in Canary Wharf

More about Sectional overhead doors · industrial doors in Canary Wharf. Last updated 19 October 2026.