Sectional overhead doors in Stratford

The short version

From a single door on a trade unit to a full bank of loading bay doors, we supply and fit insulated sectional doors in Stratford (E15) with the track layout worked out around your racking, lights and services.

Town: Stratford
Postcode district: E15
Area: Greater London
Survey: Free for new installations

What we fit in Stratford

Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.

Typical scopes of work

Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.

Safety law for industrial doors in England

Industrial doors in Stratford are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Stratford

Can you replace a roller shutter with a sectional door at our Stratford unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Will a sectional door reduce heating costs at our Stratford premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Which safety devices does a powered sectional door in Stratford need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors near Stratford

Our teams cover Stratford (E15) and nearby Bow, Canning Town, Canary Wharf, along with the rest of Greater London.

Other services in Stratford

More about Sectional overhead doors · industrial doors in Stratford. Last updated 19 October 2026.