Insulated roller shutter doors in Stratford

In short

We can fit foam-filled insulated roller doors in Stratford and across Greater London, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Stratford
Postcode district: E15
Area: Greater London
Survey: Free for new installations

What we fit in Stratford

Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.

What this work can involve

Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.

Safety law for industrial doors in England

Industrial doors in Stratford are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Sites in and around Stratford vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for insulated roller shutter doors in Stratford

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Stratford: your questions

Can you replace our old roller shutter in Stratford with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Is there enough headroom for an insulated roller door at our Stratford unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Does a powered insulated roller door in Stratford need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Stratford

Besides Stratford, we can survey and quote for sites in Bow, Canning Town, Canary Wharf and the rest of Greater London.

Other services in Stratford

More about Insulated roller shutter doors · industrial doors in Stratford. Last updated 19 October 2026.