Insulated roller shutter doors in Canary Wharf

At a glance

We can fit foam-filled insulated roller doors in Canary Wharf and across Greater London, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Canary Wharf
Postcode district: E14
Area: Greater London
Survey: Free for new installations

What we fit in Canary Wharf

Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.

What this work can involve

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.

Who is responsible for door safety at a site in Canary Wharf?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Canary Wharf: your questions

Does a powered insulated roller door in Canary Wharf need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Do you repair insulated roller doors across Greater London?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Greater London. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Can you replace our old roller shutter in Canary Wharf with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Canary Wharf

Working in Canary Wharf? We also take on jobs in Bow, Canning Town, Greenwich and across Greater London.

Other services in Canary Wharf

More about Insulated roller shutter doors · industrial doors in Canary Wharf. Last updated 19 October 2026.