Sectional overhead doors in Kent

The short version

We can install sectional overhead doors in Kent and across the South East, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Area: Kent
Nation: England
Main town: Maidstone
Survey: Free for new installations

What to specify

Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.

What this work can involve

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.

Powered door rules that apply in Kent

Kent is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for sectional overhead doors in Kent

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Will a sectional door reduce heating costs at our Kent premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Which safety devices does a powered sectional door in Kent need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Do you service sectional doors in the South East?

Yes. We service and repair most makes of sectional door across the South East, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Towns in Kent we cover

We cover 23 towns in Kent for sectional overhead doors, including Maidstone, Gillingham, Chatham, Tunbridge Wells.

Other services in Kent

More about Sectional overhead doors. Last updated 19 October 2026.