Sectional overhead doors in Tunbridge Wells

In short

We can install sectional overhead doors in Tunbridge Wells and across Kent, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Tunbridge Wells
Postcode district: TN1
Area: Kent
Survey: Free for new installations

Options for sectional overhead doors in Tunbridge Wells

Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.

Examples of work we can quote for

Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.

Who is responsible for door safety at a site in Tunbridge Wells?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for sectional overhead doors in Tunbridge Wells

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Tunbridge Wells

How much is a sectional overhead door in Tunbridge Wells?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Tunbridge Wells is confirmed in writing after a free survey.

Do you service sectional doors in Kent?

Yes. We service and repair most makes of sectional door across Kent, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Can you replace a roller shutter with a sectional door at our Tunbridge Wells unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Tunbridge Wells

Our teams cover Tunbridge Wells (TN1) and nearby Tonbridge, Crowborough, Sevenoaks, along with the rest of Kent.

Other services in Tunbridge Wells

More about Sectional overhead doors · industrial doors in Tunbridge Wells. Last updated 19 October 2026.