Industrial roller shutters in Tunbridge Wells

At a glance

Replacing a tired shutter in Tunbridge Wells, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Tunbridge Wells
Postcode district: TN1
Area: Kent
Survey: Free for new installations

Options for industrial roller shutters in Tunbridge Wells

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

Typical scopes of work

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Powered door rules that apply in Tunbridge Wells

Tunbridge Wells is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you supply security-rated shutters in Tunbridge Wells?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

How much is an industrial roller shutter in Tunbridge Wells?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Tunbridge Wells, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Tunbridge Wells site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Tunbridge Wells

Our teams cover Tunbridge Wells (TN1) and nearby Tonbridge, Crowborough, Sevenoaks, along with the rest of Kent.

Other services in Tunbridge Wells

More about Industrial roller shutters · industrial doors in Tunbridge Wells. Last updated 19 October 2026.