Sectional overhead doors in Mansfield

The short version

From a single door on a trade unit to a full bank of loading bay doors, we supply and fit insulated sectional doors in Mansfield (NG18) with the track layout worked out around your racking, lights and services.

Town: Mansfield
Postcode district: NG18
Area: Nottinghamshire
Survey: Free for new installations

Options that matter on site

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.

Examples of work we can quote for

Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.

Who is responsible for door safety at a site in Mansfield?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Prices for sectional overhead doors in Mansfield

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Do you survey sites in Mansfield before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Which safety devices does a powered sectional door in Mansfield need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Will a sectional door reduce heating costs at our Mansfield premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Mansfield

Mansfield is in the NG18 postcode district in Nottinghamshire. We also cover Sutton-in-Ashfield, Kirkby-in-Ashfield, Hucknall.

Other services in Mansfield

More about Sectional overhead doors · industrial doors in Mansfield. Last updated 19 October 2026.