Sectional overhead doors in Shropshire

In short

Sectional overhead doors for warehouses, workshops and loading bays in Shropshire. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Area: Shropshire
Nation: England
Main town: Shrewsbury
Survey: Free for new installations

What we fit in Shropshire

Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.

Typical scopes of work

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Safety law for industrial doors in England

Industrial doors in Shropshire are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Sites in and around Shropshire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for sectional overhead doors in Shropshire

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Shropshire

Do you survey sites in Shropshire before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Can you replace a roller shutter with a sectional door at our Shropshire unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Which safety devices does a powered sectional door in Shropshire need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Towns in Shropshire we cover

We cover 5 towns in Shropshire for sectional overhead doors, including Shrewsbury, Telford, Wellington, Oswestry.

Other services in Shropshire

More about Sectional overhead doors. Last updated 19 October 2026.