Sectional overhead doors in Telford

Quick answer

Sectional doors suit premises in Telford that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Telford
Postcode district: TF3
Area: Shropshire
Survey: Free for new installations

What we fit in Telford

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.

Typical scopes of work

Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.

Who is responsible for door safety at a site in Telford?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

For busy sites in Shropshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for sectional overhead doors in Telford

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which safety devices does a powered sectional door in Telford need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Do you survey sites in Telford before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Do you service sectional doors in Shropshire?

Yes. We service and repair most makes of sectional door across Shropshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Telford

Telford is in the TF3 postcode district in Shropshire. We also cover Wellington, Bridgnorth, Shrewsbury.

Other services in Telford

More about Sectional overhead doors · industrial doors in Telford. Last updated 19 October 2026.