Sectional overhead doors in Frome

The short version

Sectional doors suit premises in Frome that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Frome
Postcode district: BA11
Area: Somerset
Survey: Free for new installations

Options for sectional overhead doors in Frome

Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.

What this work can involve

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.

Who is responsible for door safety at a site in Frome?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

For busy sites in Somerset the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for sectional overhead doors in Frome

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Frome

Which safety devices does a powered sectional door in Frome need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

How soon can a sectional door be fitted in Frome?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Can you replace a roller shutter with a sectional door at our Frome unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Frome

Frome is in the BA11 postcode district in Somerset. We also cover Trowbridge, Bath, Brislington.

Other services in Frome

More about Sectional overhead doors · industrial doors in Frome. Last updated 19 October 2026.