Sectional overhead doors in Washington

In short

We can install sectional overhead doors in Washington and across Tyne and Wear, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Washington
Postcode district: NE38
Area: Tyne and Wear
Survey: Free for new installations

Options for sectional overhead doors in Washington

Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.

What this work can involve

Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Who is responsible for door safety at a site in Washington?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for sectional overhead doors in Washington

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Washington: your questions

Which safety devices does a powered sectional door in Washington need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Do you survey sites in Washington before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Do you service sectional doors in Tyne and Wear?

Yes. We service and repair most makes of sectional door across Tyne and Wear, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Washington

Washington is in the NE38 postcode district in Tyne and Wear. We also cover Chester-le-Street, Houghton-le-Spring, Hebburn.

Other services in Washington

More about Sectional overhead doors · industrial doors in Washington. Last updated 19 October 2026.