Door safety upgrades in Washington

At a glance

We can carry out safety upgrades and force testing on industrial doors in Washington and across Tyne and Wear, recording every result for your maintenance file and updating each door's risk assessment to match.

Town: Washington
Postcode district: NE38
Area: Tyne and Wear
Survey: Free for new installations

What we fit in Washington

Records. Written results and updated risk assessment for your files.
Safety edges. Edges on the closing rail detect contact and send the door back up.
Warning devices. Lights and sounders make sure people know when a door is about to move.
Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.

Examples of work we can quote for

Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.

Who is responsible for door safety at a site in Washington?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for door safety upgrades in Washington

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door safety upgrades

Do our powered doors in Washington need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

How much does a door safety upgrade cost in Washington?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Washington.

Our door at our Washington site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Door safety upgrades near Washington

Working in Washington? We also take on jobs in Chester-le-Street, Houghton-le-Spring, Hebburn and across Tyne and Wear.

Other services in Washington

More about Door safety upgrades · industrial doors in Washington. Last updated 19 October 2026.