The short version
We can carry out safety upgrades and force testing on industrial doors in Northumberland and across the North East, recording every result for your maintenance file and updating each door's risk assessment to match.
- Area
- Northumberland
- Nation
- England
- Main town
- Morpeth
- Survey
- Free for new installations
Options for door safety upgrades in Northumberland
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Photocells. Beams across the opening that stop the door closing while broken.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
Typical scopes of work
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Safety law for industrial doors in England
Industrial doors in Northumberland are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
How much does a door safety upgrade cost in Northumberland?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Northumberland.
Can you force-test our doors in Northumberland?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Our door at our Northumberland site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Towns in Northumberland we cover
We cover 6 towns in Northumberland for door safety upgrades, including Morpeth, Blyth, Cramlington, Ashington.
Other services in Northumberland
- Fire shutter servicing and drop tests
- High-speed doors
- Sectional overhead doors
- Insulated roller shutter doors
- Industrial roller shutters
- Industrial door installation
- Dock levellers
- Fire shutters
More about Door safety upgrades. Last updated 19 October 2026.