Quick answer
Older door control panels may not accept modern monitored safety devices. At premises in Berwick-upon-Tweed, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.
- Town
- Berwick-upon-Tweed
- Postcode district
- TD15
- Area
- Northumberland
- Survey
- Free for new installations
What we fit in Berwick-upon-Tweed
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Photocells. If something breaks the beam, the door will not close.
- Records. Written results and updated risk assessment for your files.
What this work can involve
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
Who is responsible for door safety at a site in Berwick-upon-Tweed?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Berwick-upon-Tweed
Can you force-test our doors in Berwick-upon-Tweed?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
How long does a safety upgrade take in Berwick-upon-Tweed?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Our door at our Berwick-upon-Tweed site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Berwick-upon-Tweed
Working in Berwick-upon-Tweed? We also take on jobs in Morpeth, Ashington, Blyth and across Northumberland.
- Door safety upgrades in Morpeth
- Door safety upgrades in Ashington
- Door safety upgrades in Blyth
- Door safety upgrades in Cramlington
- Door safety upgrades in Whitley Bay
- Door safety upgrades in Hexham
Other services in Berwick-upon-Tweed
- Industrial door replacement
- Industrial roller shutters
- Fire shutter servicing and drop tests
- Sectional overhead doors
- Insulated roller shutter doors
- Impact traffic doors
- Door automation and controls
- Sliding and folding industrial doors
More about Door safety upgrades · industrial doors in Berwick-upon-Tweed. Last updated 19 October 2026.