At a glance
We can carry out safety upgrades and force testing on industrial doors in North Yorkshire and across Yorkshire and the Humber, recording every result for your maintenance file and updating each door's risk assessment to match.
- Area
- North Yorkshire
- Nation
- England
- Main town
- York
- Survey
- Free for new installations
What to specify
- Records. Written results and updated risk assessment for your files.
- Photocells. Beams across the opening that stop the door closing while broken.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Typical scopes of work
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Who is responsible for door safety at a site in North Yorkshire?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for door safety upgrades in North Yorkshire
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Do you upgrade doors from other installers across Yorkshire and the Humber?
Yes. We upgrade safety devices on most makes of powered door across Yorkshire and the Humber, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How long does a safety upgrade take in North Yorkshire?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Do our powered doors in North Yorkshire need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Towns in North Yorkshire we cover
We cover 7 towns in North Yorkshire for door safety upgrades, including York, Middlesbrough, Harrogate, Scarborough.
Other services in North Yorkshire
- PVC strip curtains
- Industrial door replacement
- Industrial door motor replacement
- Insulated roller shutter doors
- Steel personnel and fire exit doors
- Cold store and freezer doors
- Bollards and door protection
- Fire shutter servicing and drop tests
More about Door safety upgrades. Last updated 19 October 2026.