Steel personnel and fire exit doors in North Yorkshire

At a glance

Each steel door project in North Yorkshire starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.

Area: North Yorkshire
Nation: England
Main town: York
Survey: Free for new installations

Options that matter on site

Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Outside access. Key or code access from outside while the exit stays free from inside.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.

Typical scopes of work

Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Door rules for workplaces in England

Doors in North Yorkshire workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Planning the work around your site

Sites in and around North Yorkshire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for steel personnel and fire exit doors in North Yorkshire

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in North Yorkshire: your questions

How long does it take to replace a steel door in North Yorkshire?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Do you repair fire exit doors across Yorkshire and the Humber?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Yorkshire and the Humber. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

How much is a steel personnel door in North Yorkshire?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your North Yorkshire premises in writing after a free survey.

Towns in North Yorkshire we cover

We cover 7 towns in North Yorkshire for steel personnel and fire exit doors, including York, Middlesbrough, Harrogate, Scarborough.

Other services in North Yorkshire

More about Steel personnel and fire exit doors. Last updated 19 October 2026.