Industrial roller shutters in Berwick-upon-Tweed

The short version

We can fit new steel roller shutters and replace old, damaged ones in Berwick-upon-Tweed and across Northumberland, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Berwick-upon-Tweed
Postcode district: TD15
Area: Northumberland
Survey: Free for new installations

What to specify

Manual override. If the power fails, the shutter can still be wound open by hand.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.

Jobs we can carry out

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Powered door rules that apply in Berwick-upon-Tweed

Berwick-upon-Tweed is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Sites in and around Berwick-upon-Tweed vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How quickly can a roller shutter be fitted in Berwick-upon-Tweed?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

How much is an industrial roller shutter in Berwick-upon-Tweed?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Berwick-upon-Tweed, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Berwick-upon-Tweed site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Berwick-upon-Tweed

Working in Berwick-upon-Tweed? We also take on jobs in Morpeth, Ashington, Blyth and across Northumberland.

Other services in Berwick-upon-Tweed

More about Industrial roller shutters · industrial doors in Berwick-upon-Tweed. Last updated 19 October 2026.