Industrial door replacement in Berwick-upon-Tweed

Quick answer

Old springs, corroded guides and obsolete motors make some doors in Berwick-upon-Tweed hard to keep running. A planned replacement avoids the next breakdown and leaves you with a door that suits how you work now.

Town: Berwick-upon-Tweed
Postcode district: TD15
Area: Northumberland
Survey: Free for new installations

What we fit in Berwick-upon-Tweed

Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Right door type. Replace with the same type or move to a door that suits your current needs.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Free survey. We inspect the old door and measure the opening at no cost before quoting.

Jobs we can carry out

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.

Safety law for industrial doors in England

Industrial doors in Berwick-upon-Tweed are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you take the old door away from our Berwick-upon-Tweed site?

Yes. Strip-out includes removing the old door, springs, guides and drive from site for recycling or disposal. It is priced as a separate line in the quote so you can see exactly what removal costs.

How long will our opening in Berwick-upon-Tweed be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Can we change door type when replacing at our Berwick-upon-Tweed unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Berwick-upon-Tweed

Berwick-upon-Tweed is in the TD15 postcode district in Northumberland. We also cover Morpeth, Ashington, Blyth.

Other services in Berwick-upon-Tweed

More about Industrial door replacement · industrial doors in Berwick-upon-Tweed. Last updated 19 October 2026.