The short version
Busy doors in Sunderland (SR1) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Sunderland
- Postcode district
- SR1
- Area
- Tyne and Wear
- Survey
- Free for new installations
What we fit in Sunderland
- Photocells. If something breaks the beam, the door will not close.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Records. Written results and updated risk assessment for your files.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
Typical scopes of work
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Who is responsible for door safety at a site in Sunderland?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Sunderland
Can you force-test our doors in Sunderland?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Our door at our Sunderland site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Will a safety upgrade at our Sunderland premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Door safety upgrades near Sunderland
Working in Sunderland? We also take on jobs in Seaham, Washington, Houghton-le-Spring and across Tyne and Wear.
- Door safety upgrades in Seaham
- Door safety upgrades in Washington
- Door safety upgrades in Houghton-le-Spring
- Door safety upgrades in Jarrow
- Door safety upgrades in South Shields
- Door safety upgrades in Hebburn
Other services in Sunderland
- Industrial door installation
- Industrial roller shutters
- Industrial door repairs
- Dock shelters and seals
- Steel personnel and fire exit doors
- Insulated roller shutter doors
- Dock levellers
- Impact traffic doors
More about Door safety upgrades · industrial doors in Sunderland. Last updated 19 October 2026.