The short version
Not enough headroom for a shutter at your Thatcham building? Sliding and folding doors open sideways instead of upwards, leaving the roof space clear for cranes, lighting, sprinklers and other services.
- Town
- Thatcham
- Postcode district
- RG19
- Area
- Berkshire
- Survey
- Free for new installations
Options for sliding and folding industrial doors in Thatcham
- Wicket doors. A personnel door within a leaf saves sliding the main door for every visit.
- Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
- Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
- Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
- Electric operation. Motor drives with safety edges, photocells and guarding where needed.
What this work can involve
- Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
- Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
- Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.
Who is responsible for door safety at a site in Thatcham?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
For busy sites in Berkshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Budgeting for sliding and folding industrial doors in Thatcham
| Item | Guide price (ex VAT) |
|---|---|
| Sliding / folding industrial doors | £5,995 – £24,995 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Thatcham
Which is better for our Thatcham site, top-hung or bottom-rolling?
Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.
Will a sliding door fit our building in Thatcham?
It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.
Can our existing sliding doors in Thatcham be motorised?
Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.
Sliding and folding industrial doors near Thatcham
Besides Thatcham, we can survey and quote for sites in Newbury, Basingstoke, Reading and the rest of Berkshire.
- Sliding and folding industrial doors in Newbury
- Sliding and folding industrial doors in Basingstoke
- Sliding and folding industrial doors in Reading
- Sliding and folding industrial doors in Didcot
- Sliding and folding industrial doors in Andover
- Sliding and folding industrial doors in Wokingham
Other services in Thatcham
- Hangar and large-span doors
- Door automation and controls
- Industrial door repairs
- Industrial door replacement
- Sectional overhead doors
- PVC strip curtains
- Dock shelters and seals
- Planned maintenance contracts
More about Sliding and folding industrial doors · industrial doors in Thatcham. Last updated 19 October 2026.
