Sliding and folding industrial doors in Chesterfield

The short version

For agricultural and industrial buildings in Chesterfield, we can replace worn sliding doors, upgrade them with new tracks and leaves, or automate them with the safety devices a powered door needs.

Town: Chesterfield
Postcode district: S40
Area: Derbyshire
Survey: Free for new installations

What we fit in Chesterfield

Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.

What this work can involve

Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.

Who is responsible for door safety at a site in Chesterfield?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for sliding and folding industrial doors in Chesterfield

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sliding and folding industrial doors

Do you repair sliding and folding doors in Chesterfield?

Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.

Do you fit sliding doors on farm buildings around Derbyshire?

Yes. We supply and fit steel sliding doors on agricultural buildings across Derbyshire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

How much do sliding or folding industrial doors cost in Chesterfield?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Chesterfield we confirm the fixed price in writing.

Sliding and folding industrial doors near Chesterfield

Chesterfield is in the S40 postcode district in Derbyshire. We also cover Staveley, Dronfield, Sheffield.

Other services in Chesterfield

More about Sliding and folding industrial doors · industrial doors in Chesterfield. Last updated 19 October 2026.