Sliding and folding industrial doors in Staveley

Quick answer

For agricultural and industrial buildings in Staveley, we can replace worn sliding doors, upgrade them with new tracks and leaves, or automate them with the safety devices a powered door needs.

Town: Staveley
Postcode district: S43
Area: Derbyshire
Survey: Free for new installations

What we fit in Staveley

Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
Insulated options. Insulated panel infill and edge seals for heated buildings.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.

Jobs we can carry out

Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.
Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.

Who is responsible for door safety at a site in Staveley?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

For busy sites in Derbyshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Staveley: your questions

Will a sliding door fit our building in Staveley?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Can our existing sliding doors in Staveley be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Which is better for our Staveley site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Sliding and folding industrial doors near Staveley

Besides Staveley, we can survey and quote for sites in Chesterfield, Dronfield, Sheffield and the rest of Derbyshire.

Other services in Staveley

More about Sliding and folding industrial doors · industrial doors in Staveley. Last updated 19 October 2026.