Sliding and folding industrial doors in Bordon

The short version

Each sliding or folding door project in Bordon starts with a free survey of the opening, side room, floor and structure, followed by a written fixed price before any work starts.

Town: Bordon
Postcode district: GU35
Area: Hampshire
Survey: Free for new installations

Options for sliding and folding industrial doors in Bordon

No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Wide spans. Openings of almost any width split into as many leaves as needed.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Insulated options. Insulated panel infill and edge seals for heated buildings.

Examples of work we can quote for

Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.

Who is responsible for door safety at a site in Bordon?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Bordon vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Bordon: your questions

Which is better for our Bordon site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Can our existing sliding doors in Bordon be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Do you repair sliding and folding doors in Bordon?

Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.

Sliding and folding industrial doors near Bordon

Besides Bordon, we can survey and quote for sites in Farnham, Aldershot, Fleet and the rest of Hampshire.

Other services in Bordon

More about Sliding and folding industrial doors · industrial doors in Bordon. Last updated 19 October 2026.