Steel personnel and fire exit doors in Belper

The short version

We can supply and install steel doorsets in Belper and across Derbyshire, from simple staff entrances to fire-rated and security-rated doors, with the frame, leaf and hardware supplied as one tested set.

Town: Belper
Postcode district: DE56
Area: Derbyshire
Survey: Free for new installations

What we fit in Belper

Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.

What this work can involve

Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.

Door rules for workplaces in England

Doors in Belper workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Belper

Which fire exit hardware do we need at our Belper site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Can a steel door at our Belper unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

How long does it take to replace a steel door in Belper?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Steel personnel and fire exit doors near Belper

Belper is in the DE56 postcode district in Derbyshire. We also cover Ripley, Heanor, Alfreton.

Other services in Belper

More about Steel personnel and fire exit doors · industrial doors in Belper. Last updated 19 October 2026.