At a glance
Plant rooms, switch rooms and back doors in Hyde need doors that are tough and secure. We fit steel doors with louvres, hinge bolts, multi-point locks and closers to suit each opening.
- Town
- Hyde
- Postcode district
- SK14
- Area
- Greater Manchester
- Survey
- Free for new installations
Options that matter on site
- Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
- Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
- Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
- Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
- Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Jobs we can carry out
- Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
- Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
- Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Door rules for workplaces in England
Doors in Hyde workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you fit fire-rated steel doors in Hyde?
Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.
Do you repair fire exit doors across Greater Manchester?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Greater Manchester. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
How much is a steel personnel door in Hyde?
Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Hyde premises in writing after a free survey.
Steel personnel and fire exit doors near Hyde
Besides Hyde, we can survey and quote for sites in Denton, Dukinfield, Stalybridge and the rest of Greater Manchester.
- Steel personnel and fire exit doors in Denton
- Steel personnel and fire exit doors in Dukinfield
- Steel personnel and fire exit doors in Stalybridge
- Steel personnel and fire exit doors in Ashton-under-Lyne
- Steel personnel and fire exit doors in Droylsden
- Steel personnel and fire exit doors in Stockport
Other services in Hyde
- Industrial door motor replacement
- Door automation and controls
- Fire shutter servicing and drop tests
- Dock leveller and loading bay repairs
- Industrial door repairs
- Impact traffic doors
- Sectional overhead doors
- PVC strip curtains
More about Steel personnel and fire exit doors · industrial doors in Hyde. Last updated 19 October 2026.