Steel personnel and fire exit doors in Inverness

Quick answer

Need a new fire exit door at your premises in Inverness? We fit steel doors with panic bars to BS EN 1125 or emergency exit devices to BS EN 179, chosen according to who will actually use the exit.

Town: Inverness
Postcode district: IV2
Area: Highlands and Islands
Survey: By arrangement

What to specify

Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.

What this work can involve

Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Which workplace rules apply to these doors?

For premises in Inverness, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Inverness, travel and access costs are added and shown in your written quote.

Questions from businesses in Inverness

Which fire exit hardware do we need at our Inverness site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

How much is a steel personnel door in Inverness?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Inverness premises in writing after a free survey.

Can a steel door at our Inverness unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Steel personnel and fire exit doors: other towns we cover

Inverness (IV2) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Inverness

More about Steel personnel and fire exit doors · industrial doors in Inverness. Last updated 19 October 2026.