Steel personnel and fire exit doors in Ketton

In short

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Ketton. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Ketton
Postcode district: PE9
Area: Rutland
Survey: Free for new installations

What we fit in Ketton

Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.

What this work can involve

Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.

Which workplace rules apply to these doors?

For premises in Ketton, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Ketton

Do you repair fire exit doors across Rutland?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Rutland. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Can our Ketton fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Can you fit fire-rated steel doors in Ketton?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Steel personnel and fire exit doors near Ketton

Working in Ketton? We also take on jobs in Stamford, Uppingham, Oakham and across Rutland.

Other services in Ketton

More about Steel personnel and fire exit doors · industrial doors in Ketton. Last updated 19 October 2026.