Bollards and door protection in Clacton-on-Sea

The short version

Bollards and door protection for warehouses, yards and loading bays in Clacton-on-Sea. We look at where your doors are being hit, then fit bollards, guards, buffers and bumpers to stop it happening again.

Town: Clacton-on-Sea
Postcode district: CO15
Area: Essex
Survey: Free for new installations

Options for bollards and door protection in Clacton-on-Sea

Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
Wheel guides. Steel guides steer trailers straight into the middle of each bay.
Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.
Dock bumpers. Bumpers that stop trailers at the right distance from the building.
Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.

Typical scopes of work

Fitting polymer bollards inside a busy warehouse door to keep forklifts away from the door guides.
Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.
Setting concrete-filled steel bollards in excavated foundations to protect a yard roller shutter from HGV impact.

Who is responsible for loading bay equipment at a site in Clacton-on-Sea?

The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.

Planning the work around your site

For busy sites in Essex the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for bollards and door protection

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about bollards and door protection

Will fitting bollards damage the floor at our Clacton-on-Sea site?

We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.

Can bollards at our Clacton-on-Sea site be replaced after a strike?

Yes. Damaged bollards and guards can usually be replaced individually. We check the fixings and the slab around them first, because a bent bollard often loosens its anchors or cracks the concrete at its base.

Can you protect our existing doors in Clacton-on-Sea?

Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.

Bollards and door protection near Clacton-on-Sea

Our teams cover Clacton-on-Sea (CO15) and nearby Harwich, Colchester, Felixstowe, along with the rest of Essex.

Other services in Clacton-on-Sea

More about Bollards and door protection · industrial doors in Clacton-on-Sea. Last updated 19 October 2026.