Quick answer
We can supply and install steel and polymer bollards, guide guards, frame buffers and dock bumpers in Sevenoaks and across Kent, with fixings chosen to suit your slab and the vehicles that use it.
- Town
- Sevenoaks
- Postcode district
- TN13
- Area
- Kent
- Survey
- Free for new installations
What to specify
- Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
- Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.
- Guide-rail guards. Guards over the base of door guides and tracks, where most hits land.
- Suitable fixings. Base-plated or set in foundations, chosen for your slab.
- Steel bollards. Galvanised, painted steel bollards, concrete-filled where needed.
Typical scopes of work
- Replacing bent bollards and checking the slab and anchors around them before fitting new fixings.
- Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.
- Setting concrete-filled steel bollards in excavated foundations to protect a yard roller shutter from HGV impact.
Loading bay safety in England
Dock levellers, shelters and restraints are work equipment, so in Sevenoaks the business running the site must keep them in efficient working order under PUWER 1998, and keep traffic routes safe under the Workplace Regulations 1992. Dock levellers are built to BS EN 1398; powered loading bay doors are covered by the Supply of Machinery (Safety) Regulations 2008 and BS EN 12453.
Planning the work around your site
Sites in and around Sevenoaks vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Prices for bollards and door protection in Sevenoaks
| Item | Guide price (ex VAT) |
|---|---|
| Bollard, installed | £125 – £445 each |
| Door protection (guide-rail guards, buffers) | £345 – £1,495 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Will fitting bollards damage the floor at our Sevenoaks site?
We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.
Can bollards at our Sevenoaks site be replaced after a strike?
Yes. Damaged bollards and guards can usually be replaced individually. We check the fixings and the slab around them first, because a bent bollard often loosens its anchors or cracks the concrete at its base.
How long does it take to fit door protection in Sevenoaks?
Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.
Bollards and door protection near Sevenoaks
Working in Sevenoaks? We also take on jobs in Tonbridge, Orpington, Swanley and across Kent.
- Bollards and door protection in Tonbridge
- Bollards and door protection in Orpington
- Bollards and door protection in Swanley
- Bollards and door protection in Tunbridge Wells
- Bollards and door protection in Sidcup
- Bollards and door protection in Caterham
Other services in Sevenoaks
- Planned maintenance contracts
- Complete loading bays
- High-speed doors
- Impact traffic doors
- Fire shutters
- Cold store and freezer doors
- Door automation and controls
- Steel personnel and fire exit doors
More about Bollards and door protection · industrial doors in Sevenoaks. Last updated 19 October 2026.