In short
Temperature-controlled rooms in Newbury (RG14) need doors that seal tightly, open safely from inside and stand up to forklift traffic. We specify, fit and commission them with full handover records.
- Town
- Newbury
- Postcode district
- RG14
- Area
- Berkshire
- Survey
- Free for new installations
Options for cold store and freezer doors in Newbury
- Impact protection. Kick plates, buffers and bollards to keep trucks off leaves and frames.
- Inside release. An emergency release on the inside face so nobody can be shut in.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Thick insulation. Insulation thickness is chosen for your operating temperature, with heavier leaves for freezers.
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
What this work can involve
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Fitting freezer-grade PVC strip curtains behind cold store doors that stand open during loading.
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
Safety law for industrial doors in England
Industrial doors in Newbury are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
How the work is organised
Most installations in Newbury can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices for cold store and freezer doors
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Newbury: your questions
What safety release do cold store doors in Newbury need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Why is our cold room door in Newbury hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Can you replace a freezer door at our Newbury site without losing stock?
We plan the change with you and your refrigeration engineer. Many doors can be swapped in a day, sometimes with stock moved or the plant set back temporarily, so the room returns to temperature quickly.
Cold store and freezer doors near Newbury
Newbury is in the RG14 postcode district in Berkshire. We also cover Thatcham, Basingstoke, Didcot.
- Cold store and freezer doors in Thatcham
- Cold store and freezer doors in Basingstoke
- Cold store and freezer doors in Didcot
- Cold store and freezer doors in Andover
- Cold store and freezer doors in Reading
- Cold store and freezer doors in Abingdon
Other services in Newbury
- Industrial door motor replacement
- Door automation and controls
- Door safety upgrades
- Industrial door installation
- Sectional overhead doors
- Steel personnel and fire exit doors
- Industrial roller shutters
- Bollards and door protection
More about Cold store and freezer doors · industrial doors in Newbury. Last updated 19 October 2026.
