Quick answer
Cold store and freezer doors for food producers, distributors, kitchens and pharmaceutical sites in Basingstoke. We survey the room, opening and traffic, then supply and fit an insulated door with the right seals and safety release.
- Town
- Basingstoke
- Postcode district
- RG21
- Area
- Hampshire
- Survey
- Free for new installations
Options that matter on site
- Pressure relief. We check pressure relief so a tightly sealed room does not suck the door shut.
- Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Inside release. Every door can be opened from inside without a key, even if locked from outside.
- Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
Jobs we can carry out
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Replacing an iced-up sliding freezer door with a new insulated door, heated frame and heated threshold.
- Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
Safety law for industrial doors in England
Industrial doors in Basingstoke are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Sites in and around Basingstoke vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for cold store and freezer doors in Basingstoke
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about cold store and freezer doors
Do you repair cold store doors in Basingstoke?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Do you supply cold store doors for food businesses in Hampshire?
Yes. We supply and fit cold store doors with hygienic finishes for food producers, processors, distributors and commercial kitchens across Hampshire, and we talk through your hygiene, cleaning and audit requirements at the survey before recommending a finish.
What safety release do cold store doors in Basingstoke need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Cold store and freezer doors near Basingstoke
Basingstoke is in the RG21 postcode district in Hampshire. We also cover Fleet, Thatcham, Yateley.
- Cold store and freezer doors in Fleet
- Cold store and freezer doors in Thatcham
- Cold store and freezer doors in Yateley
- Cold store and freezer doors in Farnham
- Cold store and freezer doors in Aldershot
- Cold store and freezer doors in Newbury
Other services in Basingstoke
- Steel personnel and fire exit doors
- Planned maintenance contracts
- Industrial roller shutters
- Industrial door installation
- Fire shutters
- High-speed doors
- Industrial door motor replacement
- Sectional overhead doors
More about Cold store and freezer doors · industrial doors in Basingstoke. Last updated 19 October 2026.
