Industrial roller shutters in Basingstoke

Quick answer

Roller shutters are a practical choice for sites in Basingstoke (RG21): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Basingstoke
Postcode district: RG21
Area: Hampshire
Survey: Free for new installations

Options for industrial roller shutters in Basingstoke

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Examples of work we can quote for

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.

Who is responsible for door safety at a site in Basingstoke?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you remove old shutters at sites in Basingstoke?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Basingstoke?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Can you convert our manual shutter in Basingstoke to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Basingstoke

Our teams cover Basingstoke (RG21) and nearby Fleet, Thatcham, Yateley, along with the rest of Hampshire.

Other services in Basingstoke

More about Industrial roller shutters · industrial doors in Basingstoke. Last updated 19 October 2026.