Industrial roller shutters in Aldershot

The short version

Roller shutters are a practical choice for sites in Aldershot (GU11): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Aldershot
Postcode district: GU11
Area: Hampshire
Survey: Free for new installations

What we fit in Aldershot

Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. If the power fails, the shutter can still be wound open by hand.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

Examples of work we can quote for

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Safety law for industrial doors in England

Industrial doors in Aldershot are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Aldershot: your questions

Does an electric roller shutter at our Aldershot site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Aldershot to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you repair roller shutters across Hampshire?

Yes. We repair most makes of roller shutter across Hampshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Aldershot

Besides Aldershot, we can survey and quote for sites in Farnham, Farnborough, Fleet and the rest of Hampshire.

Other services in Aldershot

More about Industrial roller shutters · industrial doors in Aldershot. Last updated 19 October 2026.