Industrial roller shutters in Farnham

The short version

Industrial roller shutters for warehouses, yards, workshops and stores in Farnham. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Farnham
Postcode district: GU9
Area: Surrey
Survey: Free for new installations

What to specify

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Colour finishes. Leave it galvanised or choose a colour that matches the building.

Jobs we can carry out

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Powered door rules that apply in Farnham

Farnham is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Farnham: your questions

Can you convert our manual shutter in Farnham to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Farnham site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you repair roller shutters across Surrey?

Yes. We repair most makes of roller shutter across Surrey, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Farnham

Our teams cover Farnham (GU9) and nearby Aldershot, Fleet, Farnborough, along with the rest of Surrey.

Other services in Farnham

More about Industrial roller shutters · industrial doors in Farnham. Last updated 19 October 2026.