Sectional overhead doors in Newbury

At a glance

From a single door on a trade unit to a full bank of loading bay doors, we supply and fit insulated sectional doors in Newbury (RG14) with the track layout worked out around your racking, lights and services.

Town: Newbury
Postcode district: RG14
Area: Berkshire
Survey: Free for new installations

What we fit in Newbury

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.

Examples of work we can quote for

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Powered door rules that apply in Newbury

Newbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Sites in and around Newbury vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Newbury: your questions

Can you replace a roller shutter with a sectional door at our Newbury unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

How soon can a sectional door be fitted in Newbury?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Will a sectional door reduce heating costs at our Newbury premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Newbury

Besides Newbury, we can survey and quote for sites in Thatcham, Basingstoke, Didcot and the rest of Berkshire.

Other services in Newbury

More about Sectional overhead doors · industrial doors in Newbury. Last updated 19 October 2026.