At a glance
Cold store and freezer doors for food producers, distributors, kitchens and pharmaceutical sites in Ashton-under-Lyne. We survey the room, opening and traffic, then supply and fit an insulated door with the right seals and safety release.
- Town
- Ashton-under-Lyne
- Postcode district
- OL7
- Area
- Greater Manchester
- Survey
- Free for new installations
What we fit in Ashton-under-Lyne
- Tight seals. Compressible gaskets pressed against the frame as the door closes.
- Thick insulation. Foam-filled leaves sized to the room temperature, from chillers to freezers.
- Hygienic finishes. Smooth, cleanable finishes chosen to meet your hygiene and audit standards.
- Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
- Heated frames. Heater cables in freezer door frames stop ice welding the seals shut.
Examples of work we can quote for
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
- Replacing an iced-up sliding freezer door with a new insulated door, heated frame and heated threshold.
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
Powered door rules that apply in Ashton-under-Lyne
Ashton-under-Lyne is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for cold store and freezer doors in Ashton-under-Lyne
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Ashton-under-Lyne: your questions
What safety release do cold store doors in Ashton-under-Lyne need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Can our cold store door in Ashton-under-Lyne be made electric?
Often, yes, if the leaf and track are sound, or with a new electric sliding door. Powered cold store doors need safety edges and photocells and a drive suited to the temperature.
Do you repair cold store doors in Ashton-under-Lyne?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Cold store and freezer doors near Ashton-under-Lyne
Our teams cover Ashton-under-Lyne (OL7) and nearby Dukinfield, Stalybridge, Droylsden, along with the rest of Greater Manchester.
- Cold store and freezer doors in Dukinfield
- Cold store and freezer doors in Stalybridge
- Cold store and freezer doors in Droylsden
- Cold store and freezer doors in Denton
- Cold store and freezer doors in Hyde
- Cold store and freezer doors in Failsworth
Other services in Ashton-under-Lyne
- Sliding and folding industrial doors
- Planned maintenance contracts
- Dock shelters and seals
- Hangar and large-span doors
- PVC strip curtains
- High-speed doors
- Sectional overhead doors
- Dock leveller and loading bay repairs
More about Cold store and freezer doors · industrial doors in Ashton-under-Lyne. Last updated 19 October 2026.
