Quick answer
We can install sliding, hinged and high-speed cold store doors in Bath and across Somerset, coordinating with your refrigeration engineer so the room is back at its working temperature quickly after the change.
- Town
- Bath
- Postcode district
- BA1
- Area
- Somerset
- Survey
- Free for new installations
What we fit in Bath
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
- Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
- Inside release. An emergency release on the inside face so nobody can be shut in.
Typical scopes of work
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Fitting freezer-grade PVC strip curtains behind cold store doors that stand open during loading.
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
Who is responsible for door safety at a site in Bath?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Most installations in Bath can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices for cold store and freezer doors
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Why is our cold room door in Bath hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Can you replace a freezer door at our Bath site without losing stock?
We plan the change with you and your refrigeration engineer. Many doors can be swapped in a day, sometimes with stock moved or the plant set back temporarily, so the room returns to temperature quickly.
What safety release do cold store doors in Bath need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Cold store and freezer doors near Bath
Bath is in the BA1 postcode district in Somerset. We also cover Trowbridge, Kingswood, Brislington.
- Cold store and freezer doors in Trowbridge
- Cold store and freezer doors in Kingswood
- Cold store and freezer doors in Brislington
- Cold store and freezer doors in Fishponds
- Cold store and freezer doors in Frome
- Cold store and freezer doors in Bristol
Other services in Bath
- Impact traffic doors
- Fire shutter servicing and drop tests
- Sectional overhead doors
- Industrial door repairs
- Fire shutters
- Industrial roller shutters
- Industrial door motor replacement
- Dock leveller and loading bay repairs
More about Cold store and freezer doors · industrial doors in Bath. Last updated 19 October 2026.